Tag: wheat

American Rye and Wheat Beer

Posted by – 2010-07-25

Batch #9 needs a snappy name, but my beer marketing department is on the West Coast at a conference, so for now this one is retaining its boring development name.  If TGL were here, it’d have a greek myth name at least.

Threw this recipe together myself, with nothing more than the BJCP style guidelines for “American Wheat or Rye Beer” (I told you I needed a more imaginative name).

Stats:

  • OG: 1.047
  • FG: 1.012
  • IBU: 18
  • ABV: 4.7
  • SRM: 5* (Yellow to Gold)

Greedys

  • 5.5 lbs US 2-Row Pale Malt
  • 2 lbs Rye Malt
  • 1.5 lbs Wheat Malt
  • 1 lb Crystal 20
  • 1 lb Rice Hulls (damn slow sparges!!)
  • 0.5 oz x 8.7% AA Amarillo Pellets @60 min
  • 0.2 oz x 7.5% AA Cascade Pellets @ 15 min
  • Wyeast 1010 American Wheat

After two not-so-great brew sessions with the stupid Blue Moon clone, I felt like I needed another shot at a beer with some wheat in it.  That said, I’m still a little gun shy around non-barley grains, so i kept this one well below 50% wheat and rye.  I wanted to try the three stage mash again (beta glucanase rest to break down the gum, protease to break down some proteins, and saccharification to make some sugar), but because of the difficulty i had last time trying to accomplish all that with hot water infusions into my 5 gal cooler, I decided to try stovetop mashing in my brewpot, then transferring to the cooler for the sparge.

Mash Schedule

  • Beta Glucanase rest: 20 min at 110*F
  • Protease rest: 20 min at 122*F
  • Saccharification: 3o min at 154*F

I went with 15 quarts of water, which is about all I figured i could safely expect to fit into my 5 gal cooler.  I heated it to 115*F and added the grist.  that brought me damn close to the target 110*F, and I was suprised to find that it only made up about 5 gal of wort (I was expecting closer to 5.5 gal).

Wary of slow sparges from thick mashes, I decided to add a quart of boiling water as part of my heating to the second rest.  that got me about half way, and I fired up the stove for the rest, stirring periodically.  It took about 5 minutes to come up to 122*F by my probe thermometer, then I killed the stove.

Every few minutes i’d stir and take a temp reading or six.  even at ~1.5 qts/lb, there were hot and cool spots in the mash, and apparently the heating process had left some hot pockets down low that I didn’t know about, because 10 min into the rest, the measured temp was now ~8-10*F too hot, right at the upper limit of the protease range.

After the 20 minutes were up, i fired up the stove again on the way to 154*F.  I stopped the stove when I got a reading of 150, wary of overshooting.  Turns out i should have stopped much sooner, because a few minutes later I was getting readings in the 165-170 range.  Yikes! Thats the temp where the enzymes I need start dying off (or whatever it is that enzymes do when they stop working).  In goes two trays of ice cubes.  They melt.  temps still in the 160-167 range.  Oh well.

Wait.  This thermometer isn’t working right.  My fantastic “Super Fast Thermopen” isn’t working right…at all.  I switch to the cheap probe on the kitchen timer, and it turns out that the mash is actually around 135*F.  WTF. Back on the stove.  My planned 30 minutes for this rest have come and gone, but i give it another 20 more on the stove, stirring and heating.  When the readings get to 145-155*F, I called it quits and poured it all into the cooler to lauter.  We’re winging it now.  It JUST fit.

This sparge FLEW.  Turns out rye isn’t nearly as unruly as wheat and oats (or so it seems).  Sparged with 17qts water at ~168*F.  Collected so much wort that i needed to dump some.

Boil was thankfully uneventful.  Chilling takes forever.  I need to upgrade from my 25ft immersion cooler. Maybe i’ll make a new one out of 50ft, or maybe i’ll get a fancy counterflow guy.  This is just a lot of waiting, and a lot of wasted water.  I’ve already mopped the floors, watered the plants, and refilled the toilet tank with chiller outflow, now the rest is going down the drain.

90 minutes of chilling, poured off the trub, yielding about 4.8 gal at a corrected OG of 1.046. Pitched Wyeast 1010 American Wheat at about 80*F.

UPDATE 2010-07-24

Came back from a day at the beach, opened the apartment door and smelled beer. The ferment went wild and blew out through the airlock, making a nice pool of near beer on the floor.  First time that’s happened, extra surprising given the couple extra inches of headspace this time from the slightly smaller batch.

Batch 27: American Wheat

Posted by – 2010-05-31

2010MAY31

- 5lb 2-Row Pale
- 5lb Wheat
- 1 lb Munich
- 1/2lb Crystal 10L

~4g mash water, strike @ 165*F

one step infusion mash 60min @ 152*F

~6g sparge water @ 175*F

Boil

60min:
0.5oz Northern Brewer
0.5oz Saaz

15min:
0.5oz Saaz

0min:
0.5oz Saaz

OG: 1.043

Pitched White Labs California Ale Yeast (WLP001)

(source)

2010JN10

Racked to secondary.

SG: 1.004

NOTES: My sample was fairly clear. Low hop aroma. Not very wheaty, there’s a bit of a medicinal flavor at the finish.

2010JN16

FG: 1.004 (5.95%)

Primed with 3/4 cup brown sugar

54 12oz bottles

mac batch #000001: Bavarian Wheat

Posted by – 2010-01-28

- 6 lbs Midwest Supply Wheat Liquid Malt Extract (65% Wheat, 35% Barley)
- 8 oz. Carapils
- 2 oz. Tettnanger Hop Pellets (4.7% AA)
- Danstar “Munich” German Wheat Dry Yeast

2009-12-29: Boil Day
- Steep Carapils (placed in muslin bag) in 5 gal of filtered water at 155*F for 30 min
- Remove grains, bring to boil.
- Remove from heat, add Liquid Wheat Malt Extract.
- Return to boil, add 1 oz. Tettnanger Hops (60 min)
- Add 1 oz. Tettnanger Hops (2 min)
- Meanwhile, boil 1/2 cup water, cool to 90*F and add dry yeast.
- Chill wort to ~70* F, using the finest homemade immersion chiller you can lay your hands on
- Neglect to take a SG reading.
- Transfer to primary and aerate (shaka-shaka)
- Pitch bloomed yeast
- SG: ~1.042

2010-01-02: Ferment slows to a crawl

2010-01-04: Rack to Secondary. Specific Gravity: 1.010

2010-01-12: FG 1.010. Prime with 5 oz corn sugar, bottle (yield ~46 12 oz. bottles). Smells a little like plastic.

2010-01-14: Still flat. Still a bit plasticy (phenolic?)

2010-01-21: Its beer! The head fades kinda quickly, but the carbonation level seems OK. This brew is a bit light on both the alcohol and body. The plastic aroma has mellowed way out, and is barely noticeable.

2010-01-27: Better head retention after a while longer in the bottles. All in all a nice brew, it went over well at a roll-your-own sushi GTG this weekend. “This is pretty good, the last homebrew i had tasted a bit like skunk or something,” says one. I might make this or something similar again, definitely a nice quaffable summery brew.