American Rye and Wheat Beer

Posted by – 2010-07-25

Batch #9 needs a snappy name, but my beer marketing department is on the West Coast at a conference, so for now this one is retaining its boring development name.  If TGL were here, it’d have a greek myth name at least.

Threw this recipe together myself, with nothing more than the BJCP style guidelines for “American Wheat or Rye Beer” (I told you I needed a more imaginative name).

Stats:

  • OG: 1.047
  • FG: 1.012
  • IBU: 18
  • ABV: 4.7
  • SRM: 5* (Yellow to Gold)

Greedys

  • 5.5 lbs US 2-Row Pale Malt
  • 2 lbs Rye Malt
  • 1.5 lbs Wheat Malt
  • 1 lb Crystal 20
  • 1 lb Rice Hulls (damn slow sparges!!)
  • 0.5 oz x 8.7% AA Amarillo Pellets @60 min
  • 0.2 oz x 7.5% AA Cascade Pellets @ 15 min
  • Wyeast 1010 American Wheat

After two not-so-great brew sessions with the stupid Blue Moon clone, I felt like I needed another shot at a beer with some wheat in it.  That said, I’m still a little gun shy around non-barley grains, so i kept this one well below 50% wheat and rye.  I wanted to try the three stage mash again (beta glucanase rest to break down the gum, protease to break down some proteins, and saccharification to make some sugar), but because of the difficulty i had last time trying to accomplish all that with hot water infusions into my 5 gal cooler, I decided to try stovetop mashing in my brewpot, then transferring to the cooler for the sparge.

Mash Schedule

  • Beta Glucanase rest: 20 min at 110*F
  • Protease rest: 20 min at 122*F
  • Saccharification: 3o min at 154*F

I went with 15 quarts of water, which is about all I figured i could safely expect to fit into my 5 gal cooler.  I heated it to 115*F and added the grist.  that brought me damn close to the target 110*F, and I was suprised to find that it only made up about 5 gal of wort (I was expecting closer to 5.5 gal).

Wary of slow sparges from thick mashes, I decided to add a quart of boiling water as part of my heating to the second rest.  that got me about half way, and I fired up the stove for the rest, stirring periodically.  It took about 5 minutes to come up to 122*F by my probe thermometer, then I killed the stove.

Every few minutes i’d stir and take a temp reading or six.  even at ~1.5 qts/lb, there were hot and cool spots in the mash, and apparently the heating process had left some hot pockets down low that I didn’t know about, because 10 min into the rest, the measured temp was now ~8-10*F too hot, right at the upper limit of the protease range.

After the 20 minutes were up, i fired up the stove again on the way to 154*F.  I stopped the stove when I got a reading of 150, wary of overshooting.  Turns out i should have stopped much sooner, because a few minutes later I was getting readings in the 165-170 range.  Yikes! Thats the temp where the enzymes I need start dying off (or whatever it is that enzymes do when they stop working).  In goes two trays of ice cubes.  They melt.  temps still in the 160-167 range.  Oh well.

Wait.  This thermometer isn’t working right.  My fantastic “Super Fast Thermopen” isn’t working right…at all.  I switch to the cheap probe on the kitchen timer, and it turns out that the mash is actually around 135*F.  WTF. Back on the stove.  My planned 30 minutes for this rest have come and gone, but i give it another 20 more on the stove, stirring and heating.  When the readings get to 145-155*F, I called it quits and poured it all into the cooler to lauter.  We’re winging it now.  It JUST fit.

This sparge FLEW.  Turns out rye isn’t nearly as unruly as wheat and oats (or so it seems).  Sparged with 17qts water at ~168*F.  Collected so much wort that i needed to dump some.

Boil was thankfully uneventful.  Chilling takes forever.  I need to upgrade from my 25ft immersion cooler. Maybe i’ll make a new one out of 50ft, or maybe i’ll get a fancy counterflow guy.  This is just a lot of waiting, and a lot of wasted water.  I’ve already mopped the floors, watered the plants, and refilled the toilet tank with chiller outflow, now the rest is going down the drain.

90 minutes of chilling, poured off the trub, yielding about 4.8 gal at a corrected OG of 1.046. Pitched Wyeast 1010 American Wheat at about 80*F.

UPDATE 2010-07-24

Came back from a day at the beach, opened the apartment door and smelled beer. The ferment went wild and blew out through the airlock, making a nice pool of near beer on the floor.  First time that’s happened, extra surprising given the couple extra inches of headspace this time from the slightly smaller batch.

Blue Moon Clone Revisited

Posted by – 2010-07-23

I’ll call this batch 8.1.  Brew Day was 2010-07-07

After the disastrous outcome of the previous attempt at brewing this Blue Moon clone recipe, I went back to John Palmer’s How To Brew to see if I could figure out where I’d gone wrong.

One of the things that I picked up was that the protein rest (that I’d recollected was so important for mashes with a high percentage of wheat and unmalted grain in the bill) actually doesn’t do much to avoid stuck sparges, as I’d thought.  Either I read it wrong the first time or I’d made it up in my head.  Turns out there’s a Beta Glucanase rest that is supposed to prevent gumminess.  I decided for the second attempt that I’d include this Beta Glucanase rest.  Also, I added 1 lb of rice hulls for some drainage.

My Beta Glucanase rest was to be 110*F for 20 min, Protease rest 122*F for 20 min, and finally the main event at 154*F for 30 min.

I came out a little hot for the Beta Glucanase at 118, hit my temp for the Protease rest pretty well, and did pretty well on the saccharification rest.

The thing is, I had to do all of this in a 5 gal rubbermaid drink cooler, which doesn’t leave much room for water when you’ve got 11 lbs of grain.  Also, since i’m doing infusion mashing, and wanted three different temperatures, my first rest was super stiff at 8 qts water to 11 lbs grain (so that i could add water to hit my second and third rests).

After all that work, the sparge was still slow as hell (90 minutes to collect 4.5 gal).  I started brewing after work (always a dumb idea), and I didn’t pitch the yeast until 2:30 AM.  I was a tired, grumpy dude, but I wasn’t about to give up on a second shot at this.

The first taste on the way into the primary fermenter had a sharply bitter finish, maybe from the bitter orange peel.  I hoped it would mellow out.

When i racked to secondary on 7-19, the bitterness may have eased a bit.  It also seemed a bit estery, probably due to the warm temps we’ve been having. My fermentation temp had been 78-80 *F, pretty damn high.

Blue Moon Mash Disaster

Posted by – 2010-06-23

mac batch #8 (but don’t wait around for the tasting results)

I blew it tonight.

Followed the recipe and mash schedule for Austin Homebrew’s Blue Moon clone, reprinted on homebrewtalk.com

The mash was a mess.  First off, the AH mash schedule yields a super loose mash by the time you’re done (1.7 quarts/lb), which makes establishing clear runnings a real pain in the ass, cause the grain bed doesn’t settle out.

Secondly, despite hitting my protein rest temp dead on, and double checking the second infusion calculations to go from the protein rest to the saccrification rest, I ended up 10*F too hot for my saccrification.  Instead of my target of 158*F, i ended up closer to 170*F.   Total mystery as to why.

Lastly, when the runnings finally cleared out a bit (though still plenty cloudy from all the wheat and such), the sparge slowed to a trickle.  At this point, it was late at night, and the thought of waiting around 2 hours for the sparge to finish, just to wait another 2 for the boil and chill, sounded like madness.  I dumped the grains.  Screw it.

My dear girlfriend really wants a blue moon clone, however, so i’m gonna have to try this one again.  Next time:

  • get the mash temps right
  • use rice hulls to try to keep the sparge moving
  • maybe use less water for the protein rest, so that the final mash won’t be so loose
  • don’t fuck it up

[TASTING] Revolution Brewing Anti Hero IPA

Posted by – 2010-06-11

revbrew.com

Pours red-tinged copper. White head. Big hop nose. Round malt flavor, smooth, with big citrus hop finish. Decent lacing. Did I say citrusy? Piney too. Malt backbone keeps it smooth.

Poured from a growler.

Batch 27: American Wheat

Posted by – 2010-05-31

2010MAY31

- 5lb 2-Row Pale
- 5lb Wheat
- 1 lb Munich
- 1/2lb Crystal 10L

~4g mash water, strike @ 165*F

one step infusion mash 60min @ 152*F

~6g sparge water @ 175*F

Boil

60min:
0.5oz Northern Brewer
0.5oz Saaz

15min:
0.5oz Saaz

0min:
0.5oz Saaz

OG: 1.043

Pitched White Labs California Ale Yeast (WLP001)

(source)

2010JN10

Racked to secondary.

SG: 1.004

NOTES: My sample was fairly clear. Low hop aroma. Not very wheaty, there’s a bit of a medicinal flavor at the finish.

2010JN16

FG: 1.004 (5.95%)

Primed with 3/4 cup brown sugar

54 12oz bottles

[TASTING] Revolution Brewing Eugene Porter

Posted by – 2010-05-31

http://revbrew.com

Pours black, with coffee-colored head. Head subsides to a fine lace on the glass. Dark roast nose, a hint of chocolate. Smooth, even roast flavor. Any hops bitterness is absent, the malt dominates. Coffee finish.

Poured from a growler, hand delivered from the brewery.

Lagunitas IPA Approximation

Posted by – 2010-04-30

Brew Date: 2010-04-24

I was looking to make a spicy, refreshing IPA like Lagunitas. With help from our local brew store, we decided on this recipe.

Grains

  • 1 lbs 2 Row Pale
  • 7 oz Dextrine Cara Pils
  • 5 oz Crystal
  • 3 oz Munich
  • Malt Extract
  • 5 lbs 9 oz Light Dried Malt Extract

Hops

  • 60 mins: 1 1/2 oz Challenger A.A. 7%
  • 30 mins: 1/2 oz Cascade A.A. 7.3%, 1/4 oz Willamette A.A. 5.6%
  • End of Boil: 1 1/2 oz Cascade

Yeast

  • Safale 05 American Ale Yeast

OG: 1.042, FG: 1.020

Despite my past unfounded prejudice against hop pellets, malt powder, and dried yeast–I used to live in the Pacific NW and we only used freeze dried hops, extract syrup, and liquid yeast–this turned out great. I’ve since found the Safale dried yeasts to be reliable and have excellent flavor. I pitched the dry yeast directly into the wert.

saphouse heavy ale

Posted by – 2010-04-18

8.8 lbs Premier light hopped malt extract

1.2 lbs Vermont light amber maple syrup

2 oz Cluster hop pellets

water to make 5 gal

Boiled the malt, 1 gal water, and 1 oz of the hops, then added maple for 1 minute boil, and second oz of hops just before shutting down. Pitched 5 packets of stale (several-year-old) yeast.

Soda Batch #6: Ginger Beer

Posted by – 2010-04-14

2010APR14

* 3oz ginger root
* juice from one lime
* 1 teaspoon Cream of Tartar
* 2 dashes of cayenne pepper
* 1 1/2 cup turbinado sugar
* 4 quarts water

~40min:
Combined ingredients and 1 quart water. Brought to boil and simmered.

0min:
Added 3 quart water.

Activated 1/2 teaspoon Red Star Champagne Yeast in 1/2cup ~100*F water.

Pitched yeast.

8 16oz. bottles

Kolsch for Anna Rose

Posted by – 2010-04-11

When a certain girl I know was 3 or 4, she decided her given name wasn’t doing it for her anymore, and instead introduced herself to anyone who asked as Anna Rose.

Neither Anna Rose nor her grown-up alter ego particularly like helping me with the brewing, but they’ve proven to be good at making up names.

Brew Day: 2010-04-11

  • 6.5 lb German Pilsner Malt
  • 1 lb Wheat (unclear whether this was malted or not)
  • 0.5 lb Dextrine (CaraPils)

Single infusion mash in 10 qts water at a target of 152*F for 90 min.

Sparge with 18-20 qts at 167*F

Collected a total of ~5.9 gal which measured 1.031 at 130*F, corrected to approximately 1.043 for a total of 254 pts.

Boil 60 min

  • 6.5 AAU Spalt hop pellets (2.5 oz * 2.6% AA) at 60 min
  • 1/2 tsp Irish Moss at 15 min
  • 1 AAU Spalt hop pellets (0.5 oz * 2.6% AA) at 10 min

Chill to ~65*F, post-boil yield of ~4.8 gal at 1.051 (245 total points, or 30.6 pts/lb)

Poured off the trub into the primary, I ended up with ~4.4 gal.  To hit my target OG, I calculated that I’d need to add water to top up to ~5 gal.  After topping up, my temp in the primary was 71* (in the butter zone), but my OG ended up being 1.042 (three points low).  Not sure where I went wrong, but it won’t make a whole lot of difference in the end.

Pitched Wyeast 2565 Kolsch